M102-16 KJET EFI kit (2.3-16/2.5-16) with pulleys

27993755 2333 - exc. VAT

Private customers in the EU have to pay the VAT of 20%. Companies in the EU can buy products without VAT if they insert a valid VAT number in the checkout page. Customers outside of the EU can buy products without VAT

Clear

Description

Complete EFI (electronic fuel injection) kit for Mercedes-Benz M102-16 K/KE Jetronic engines.

The EFI (electronic fuel injection) kit offered by Elbe Engineering is designed for Mercedes Benz M102-16 engines that use Bosch K Jetronic (CIS) or Bosch KE Jetronic (CIS-E) fuel injection systems.

The EFI kit offered by Elbe Engineering is the only reasonable alternative to the original parts in case of failure of injectors (new original part: 3000 Euros) and/or ignition module (new original part about 3000 Euros) of the M102-16 K/KE Jetronic engines.

The production of original fuel distributors and its components has been discontinued and it is unlikely that unused ones will be found on the market. Replacing them with used parts offered on the aftermarket may not be the solution to the problems that have arisen.

The EFI kit offered by Elbe Engineering ensures better engine starting, smoother operation and significant fuel savings, especially if the original fuel system is worn out. The modern engine control unit allows very precise metering of fuel and igniting it at just the right moment – impossible to achieve with mechanical control.

The EFI kit includes the latest generation wide band lambda controller with a sensor that regulates the fuel supply so that the fuel mixture is always optimal. The wide band lambda (oxygen) sensor excels the older and simpler narrow band oxygen sensor in resolution. The result is a more accurate fuel mixture, which technically means higher torque and lower fuel consumption.

Distributor-free ignition system allows for any advance angle, at any time and RPM. Optimal fuel metering and highly accurate ignition timing yield to increased economy and performance. Depending on the car model, fuel savings may reach 2 to 2.5 l per 100 km, which reduces CO2 emissions by 47-57 g / km.

The installation of the EFI kit offered by Elbe Engineering does not require any modifications to your car. Just remove the old system, replace it with new one and turn the key.

Preserving the old system makes it easy to restore the car’s originality later.

The installation of our EFI kit makes these older cars more easy to drive, more economical and less polluting than before. There is no need to worry about starting the engine or operating the car in different modes.

Also, the kit offers the possibility to make a quick diagnosis or read engine parameters via Bluetooth using an Android device.

 

IMPORTANT: You can now buy Elbe Engineering’s EFI kit without our ECU and choose your own ECU.

 

When should you consider the installation of Elbe Engineering’s EFI kit

 

 

Shipping information

Orders are usually packed within 2-5 business days and handed over to DHL Express carrier.

The delivery time is usually 1-6 business days, depending on your location and the chosen delivery type.

Important information: Due to COVID-19 pandemic in the world, there might be unexpected delays.

 

*You can calculate the shipping cost on the cart page.

Additional information

Complete EFI (electronic fuel injection) kit for Mercedes-Benz M102-16 K/KE Jetronic engines.

 

Including:

⦁ Powerful engine management system with Bluetooth connection.
⦁ Multiple outputs for controlling electronic devices like aftermarket cooling fan or any other relay switched devices.
⦁ Advanced self-tuning function for fuel what really works.
⦁ Engine data monitoring/data log with Android devices.
⦁ Engine control unit is capable for any performance modification in future.
⦁ Comes with base map however needs adjusting TDC (engine Top Dead Center) offset by using timing light device for ignition check)

 

Handcrafted engine wiring harness – logical layout with different types/colors of connectors you can not mismatch. Only 2 connections to chassis side – RPM output (bolted) and ignition power (pin into original OVPR (over voltage protection relay) socket) and done!

 

Sensors:

⦁ Crankshaft position with mounting bracket.
⦁ Coolant temperature sensor.
⦁ Intake temperature sensor.
⦁ Manifold air pressure (inside ECU).
⦁ Throttle position with special adapter for MB throttles.
⦁ Wideband O2 lambda sensor.

 

Mechanical components:

⦁ Adapter between original air filter housing and throttle body.
⦁ Idle speed control motor
⦁ Ignition coils (Coil On Plug).
⦁ Fuel rail with 4pcs of injectors and mounting accessories.
⦁ Fuel pressure regulator with special designed billet housing.
⦁ Compact anodized aluminum fuel fittings with black nylon braided Teflon hoses.
⦁ “Olive” fuel fittings for connecting chassis side fuel lines.
⦁ Distributor block off plug.

 

Pulleys:

⦁ Crankshaft pulley with trigger wheel.
⦁ Waterpump pulley.
⦁ Generator pulley.
⦁ Power steering pump pulley.

 

You may also like…