OM606 T3 manifold with exhaust wrap

1199 999 - exc. VAT

Private customers in the EU have to pay the VAT of 20%. Companies in the EU can buy products without VAT if they insert a valid VAT number in the checkout page. Customers outside of the EU can buy products without VAT.

2 in stock

SKU: 453 Categories: , , Tag:

Description

Elbe Engineering has designed a compact and universal exhaust manifold for the Mercedes-Benz turbo diesel engines OM605 and OM606.

High performance turbo diesel engines are also known as SuperTurboDiesel (STD).

The turbocharger mount on the manifold is universal (T3 Divided flange) and fits most turbochargers (offered by several manufacturers) with T3 type flange.

The manifold designed by Elbe Engineering allows you to choose among new turbochargers of different brands and sizes, as well as from those offered on the aftermarket. For example, most commonly used are Holset HX35 and HX40. The alternative brands are Garrett and BorgWarner, etc. Also you can use tuning turbochargers, e.g. Precision Turbo, Comp Turbo, Turbonetics, Turbobandit, and others.

Designing the manifold, special attention has been paid to the activation of the turbocharger at the lowest possible engine speed. A so-called “Split pulse” type solution is used, where the first 3 cylinders are separated from the 3 rear ones, according to their firing phases. This solution gives better flow throughout the system.

Exhaust gases from cylinders 4, 5, and 6 are conducted to the turbocharger separately from the exhaust gases of cylinders 1, 2, and 3. Also, the turbine housing (attached to the manifold) of the turbocharger is also divided inside by a partition. This is known as “divided turbine”.

As a result, the speed and the amount of the exhaust gases entering the turbocharger at every moment is higher, which allows the turbocharger to start at lower speeds. In addition, this design does not limit the gases flow at high speeds (5000-7000 rpm).

A larger turbocharger can pump more air into engine, which in turn promotes complete combustion of diesel fuel due to additional oxygen. As a result, power increases.

Elbe Engineering has designed the exhaust manifold to be extremely compact – both in protrusion and height. It fits all OM605 and OM606 engines in Mercedes-Benz bodies. For example, the G class (W460, W461, W462, and W463) has engine mounted much higher to the body than other car models. Most aftermarket manifolds are not suitable for use with a G Class motor mount, but Elbe Engineering’s is.

Due to its compact design, this manifold has also been used in other car brands such as: BMW, Volvo, Nissan, Toyota, Land Rover, and many others.

In addition to cars, OM605 and OM606 engines are often used on boats, especially popular are they in Scandinavia. Of course, Elbe Engineering’s manifolds can be installed there.

The compact and universal exhaust manifolds designed by Elbe Engineering are made of carbon steel. The manifolds are handmade using TIG welding. The surfaces of the manifolds are covered with a heat-resistant material that is durable up to 800 ºC – more than enough considering the combustion temperature of the diesel engine.

The mounting surfaces of the manifold are ground on a milling machine to ensure as hermetic as possible joints in the exhaust system. This is most important because the system contains very large mass of high-temperature gas under high pressure.

The exhaust manifold designed by Elbe Engineering makes your vehicle more dynamic. It also increases driving comfort and reduces fuel consumption.

 

To prevent heat damage and fire in the engine compartment, we strongly recommend using manifolds covered with heat-resistant tape.

 

 

Shipping information

Orders are usually packed within 1-2 business days and handed over to DHL Express carrier.

The delivery time is usually 1-6 business days, depending on your location and the chosen delivery type.

Important information: Due to COVID-19 pandemic in the world, there might be unexpected delays.

Additional information

OM606 Turbodiesel performance exhaust manifold for aftermarket turbochargers, covered with exhaust wrap.

T3 divided turbo flange. (Other flange types on request)

⦁ Carbon steel.
⦁ Handcrafted / TIG welded.
⦁ Flange surfaces machined with mill.
⦁ Compact (dimensions and weight) and reasonably light with great flow.
⦁ 1,2,3 cylinders separated from 4,5,6 cylinders. True split pulse design.
⦁ Fits for most cars/chassis.

You may also like…